{"id":692,"date":"2021-12-21T15:25:00","date_gmt":"2021-12-21T07:25:00","guid":{"rendered":"https:\/\/ecmos2.liho.work\/?p=692"},"modified":"2024-09-10T13:40:55","modified_gmt":"2024-09-10T05:40:55","slug":"ec25c256","status":"publish","type":"post","link":"https:\/\/www.ecmos.com.tw\/cn\/eeprom\/ec25c256\/","title":{"rendered":"EC25C256\uff5c256Kbits SPI Serial EEPROM"},"content":{"rendered":"\n
\u898f\u683c\u66f8\u4e0b\u8f09<\/div><\/a>\n\n\n\n
\n\n\n\n

General Description<\/h3>\n\n\n\n

The EC25C256 is an industrial standard electrically erasable programmable read only memory (EEPROM) Product that utilizes standard Serial Peripheral Interface (SPI) for communications. The EC25C256 contains a memory array of 256K bits (32,768x 8), which is organized in 64 bytes per page.
This EEPROM operates in a wide voltage range from 1.7V to 5.5V,which fits most application.
The device provides low-power operations and low standby current. The product is offered in
Lead-free, RoHS, halogen free or Green package.
The available package types are 8-pin SOP, TSSOP and UDFN.
The functionalities of the EC25C256 are optimized for most applications, such as consumer
electronics, wireless, telecommunication, industrial, medical ,instrumentation, commercial and others, where low-power and low-voltage Are vital. This product has a compatible SPI interface: Chip-Select ( CS ), Serial Data In (SI),
Serial Data Out (SO) and Serial Clock (SCK) for high-speed communication. Furthermore, a Hold feature via HOLD pin allows the device entering into a suspended state whenever necessary and resuming the communication
without re-initializing the serial sequence. A Status Register facilitates a flexible write protection mechanism and device Status monitoring.
The EC25C256 also offers an additional page, named the Identification Page(64 bytes) which can be written and
(later) permanently locked in Read-only mode. This Identification Page offers flexibility in the application
board production line, as the Identification Page can be used to store unique identification parameters
and\/or parameters specific to the production line. In order to refrain the state machine from entering into a
Wrong state during power-up sequence or a power toggle off-on condition, a power on reset circuit is implemented. During power-up, the device does not respond to any instructions until the supply voltage (VCC)has reached an acceptable stable level above the reset threshold voltage. Once VCC passes the power on reset threshold, the device is reset and enters into Standby mode. This should also avoid any inadvertent
Write operations during power-up stage. During power\u0002down process, the device will enter into standby mode,
once VCC drops below the power on reset threshold voltage. In addition, the device will be in standby mode
after receiving the Stop command, provided that no internal write operation is in progress. Nevertheless,
it is illegal to send a command unless the VCC is within its operating level.<\/p>\n\n\n\n

Features<\/h3>\n\n\n\n

\u25c6 Serial Peripheral Interface (SPI) Compatible
\u2014Supports Mode 0 (0,0) and Mode 3 (1,1)
\u25c6 Wide-voltage Operation
\u2014VCC = 1.7V to 5.5V
\u25c6 Low power CMOS
\u2014Standby current: \u22641 \u03bcA (1.7V)
\u2014Operating current: \u22642 mA (1.7V)
\u25c6 Operating frequency: 20 MHz (5.5V)
\u25c6 Memory organization: 256Kb (32,768 x 8)
\u25c6 Byte and Page write (up to 64 bytes)
\u2014Partial page write allowed
\u25c6 Block Write Protection
\u2014 Protect 1\/4, 1\/2, or Entire Array
\u25c6 Self timed write cycle: 5 ms (max.)
\u25c6 Additional Write lockable Page (Identification page)
\u25c6 High-reliability
\u2014 Endurance: 1 million cycles
\u2014 Data retention: 100 years
\u25c6 Industrial temperature grade
\u25c6 Packages (8-pin): SOP, TSSOP and DFN
\u25c6 Lead-free, RoHS, Halogen free, Green<\/p>\n\n\n\n

\n\n\n\n