EC1736|3A, 40V Asynchronous Step-Down Converter

General Description
EC1736 is a DC/DC Buck Synchronous with four current limit pins suitable for many multi‐ output applications.
It is designed to allow for operating a wide supply voltage range from 9V to 40V. It has both high‐ side
and low‐ side drivers allowing synchronous configuration using two external power‐ NMOS. This IC can operate
in both Constant Current (CC) and Constant Voltage (CV) modes. EC1736 operates as a DC‐ DC Buck
Controller providing a wide range of outputs at Constant Current (CV) from 1.2V to 28V and the output
current as high as 10A or above. It has a Constant Current(CC) mode so that output current can be set
externally and at a accuracy of +/‐ 7%. The current mode control and external compensation makes feedback
control have good line and load regulation with flexible external design. There are four independent current
limit control pins for four separate loads. Each of the current limit can be set by a resistor(RCS) at 100Mv
across it. Of course, output peak current limit is working during normal operation
Features
◆Vin: 8.5V to 40V
◆Vout: 1.25V to 28V; typical at 5V
◆CC/CV Mode Control
◆PFM Mode for Increased Light Load Efficiency
◆4 outputs current precision OCP: Adjustable Current-Limit Protection
◆Burst mode when OCP/SCP occur
◆Protection
NMOS peak current limit: accuracy:~10% Output short protection: reduce input current to less than 20mA(RMS)
OVP(output Over-Voltage Protection) Output FB short protection Temperature shut down(OTP)
◆Adjustable Output Cable Resistance Compensation
◆Duty: 0~97%
◆Switching Frequency: 100kHz to 300KHz
◆Integrated MOSFET Drivers
◆QFN20 Package
Applications
◆Car Charger
◆High‐ Brightness Lighting
◆General‐ Purpose DC/DC Controller


規格書下載

規格是死的,設計是活的
我們提供具有靈活彈性的客製化IC與模組設計

告訴我們你想做的產品項目吧!

規格是死的,設計是活的
我們提供具有靈活彈性的客製化IC與模組設計

告訴我們你想做的產品項目吧!