GIM082|Flash Based 8 Bit

GIM082|Flash Based 8 Bit

規格書下載

Features 

  • Only 37 Instructions to Learn
    .All single-cycle instructions except branches
  • Operating Speed:
    .DC – 20 MHz oscillator/clock input
    .DC – 200 ns instruction cycle
  • Interrupt Capability
  • 8-Level Deep Hardware Stack
  • Direct, Indirect, and Relative Addressing modes

Special Microcontroller Features

  • Internal and External Oscillator Options
    .Precision Internal 4 MHz oscillator factory calibrated to ±1%
    .External Oscillator support for crystals and resonators
    .5 us wake-up from Sleep, 3.0V, typical
  • Power-Saving Sleep mode
  • Wide Operating Voltage Range – 2.0V to 5.5V
  • Industrial and Extended Temperature Range
  • Low-Power Power-on Reset (POR)
  • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Brown-out Detect (BOD)
  • Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation
  • Multiplexed MCLR/Input Pin
  • Interrupt-on-Pin Change
  • Individual Programmable Weak Pull-ups
  • Programmable Code Protection
  • High Endurance Flash/EEPROM Cell
    .100,000 write Flash endurance
    .1,000,000 write EEPROM endurance
    .Flash/Data EEPROM Retention: > 40 years

Low-Power Features

  • Standby Current: – 1 nA @ 2.0V, typical
  • Operating Current:
    .8.5 A @ 32 kHz, 2.0V, typical
    .100 A @ 1 MHz, 2.0V, typical
  • Watchdog Timer Current
    .300 nA @ 2.0V, typical
  • Timer1 Oscillator Current:
    .4 uA @ 32 kHz, 2.0V, typical

Peripheral Features

  • 6 I/O Pins with Individual Direction Control
  • High Current Sink/Source for Direct LED Drive
  • Analog Comparator module with: One analog comparator
    .Programmable on-chip comparator voltage reference (CVREF) module
    .Programmable input multiplexing from device inputs
    .Comparator output is externally accessible

APPLICATION

  • 消費性電子產品
  •  家電產品
  • 3C 產品

規格書下載

規格是死的,設計是活的
我們提供具有靈活彈性的客製化IC與模組設計

告訴我們你想做的產品項目吧!

規格是死的,設計是活的
我們提供具有靈活彈性的客製化IC與模組設計

告訴我們你想做的產品項目吧!

回到頂端

訂閱最新產品電子報

*必填