Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopperstabilization. This method reduces the offset voltage normally caused by device over molding, temperature dependencies, and thermal stress.
EC2622 is special made for low operation voltage, 1.65V, to active the chip which is includes the following on a single silicon chip: voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, CMOS output driver. Advanced CMOS wafer fabrication processing is used to take advantage of
low-voltage requirements, component matching, very low input-offset errors, and small component geometries. This device requires the presence of omni-polar magnetic fields for operation.
The package type is in a Halogen Free version has been verified by third party Lab.
◆ CMOS Hall IC Technology
◆ Strong RF noise protection
◆ 1.65 to 3.5V for battery-powered applications
◆ Omni polar, output switches with absolute value of North or South pole from magnet
◆ Operation down to 1.65V, Micro power consumption
◆ High Sensitivity for reed switch replacement applications Direction detection
◆ Low sensitivity drift in crossing of Temp. range
◆ Ultra Low power consumption at 5uA (Avg)
◆ High ESD Protection, HBM > ±4KV( min )
◆ Operation with South Pole (OUT1) or North Pole (OUT2)
◆ Totem-pole output
◆ Solid state switch
◆ Handheld Wireless Handset Awake Switch ( FlipCell/PHS Phone/Note Book/Flip Video Set)
◆ Magnet proximity sensor for reed switch replacement in low duty cycle applications
◆ Water Meter
◆ Pab PC