EC301_EC302|USB Type-C DFP Controller IC Without/with Internal PMOS

EC301_EC302|USB Type-C DFP Controller IC Without/with Internal PMOS

規格書下載

General Description

EC301 is an USB Type-C controller (USB Type-C™ Specification 1.1) with and without internal PMOS FET.
It is specially designed for power adapter and charger applications (*up to 3A @5V).
It negotiates with the UFP devices according to USB Type-C specifications.
Once EC301/EC302 identifies the UFP devices as USB Type-C compliant, it will provide the current rating information accordingly.
It also prevents the VBUS from being asserted unless a valid connection has been detected.EC301 is a USB Type-C DFP CC controller chip with intelligent identification function.
USB Type-C chip supports V1.1 port protocol connection detection, identification, DFP radio equipment and inserted current configuration, only in the adapter (DFP) to open the power supply to the VBUS detection after UFP insertion, when UFP pulled out, will automatically shut down VBUS.
Widely used in car charger, charger,charging, mobile power etc.

Features

◆CC1/CC2 Pin to Advertise Power Source Current rating to UFP Device
◆Three DFP CC Termination Current Source Levels Auailable
–80UA for Default USB Power Application
–180uA for [email protected] Application-
–300uA for [email protected] Application
◆P-MOS VBUS Switch Control Pin (EC301)
◆Build in internal P-MOS (EC302)
◆VDD Operating Range 3.0V-5.5V
◆2KV HBM ESD Protection

Applications

◆USB Type-C DFP for Mobile Chargers
◆AC-DC Adapters
◆Power Adapters
◆Car Charger


規格書下載

規格是死的,設計是活的
我們提供具有靈活彈性的客製化IC與模組設計

告訴我們你想做的產品項目吧!

規格是死的,設計是活的
我們提供具有靈活彈性的客製化IC與模組設計

告訴我們你想做的產品項目吧!

回到頂端

訂閱最新產品電子報

*必填