The EC24C128T is a 128-Kbit I 2 C-compatible Serial EEPROM (Electrically Erasable Programmable Memory) device.
The device is designed to operate in a supply voltage range of 1.7V to 5.5V, with a maximum of 1MHz transfer rate.
The operating temperature range is from -40°C to +105°C. The device incorporates a Write Protection pin used for hardware Write Protection on the whole memory array.
The Serial EEPROM memory is organized as 256 pages of 64 bytes each, totaling 16384*8 bits.
The EC24C128T offers an additional 64-byte Identification Page for users to store sensitive application parameters.
This page can be permanently locked in Read-only mode after the application data is written into the Identification Page.
The EC24C128T also offers a separate memory block containing a factory programmed 128-bit Unique ID.
This block is in Read-only mode and can be accessed to by sending a specific Read command
The EC24C128T is delivered in Lead-free green packages: TSSOP-8, SOP-8, DIP-8, SOT23-5
- Supply Voltage: 1.7V to 5.5V
- 2-wire Serial Interface I 2 C Compatible
—- 400 kHz and High Speed 1MHz Transfer Rate Compatibility
- Byte and Page (up to 64 Bytes) Write Mode
—- Partial Page Writes Allowed
Self-timed Write Cycle (5ms Maximum)
- Hardware Write Protection on the Whole Memory Array
- Additional 64-byte Write Lockable Page and 128-bit Unique ID
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- High Reliability
—- Endurance: 1,000,000 Write Cycles
—- Data Retention: 100 Years
- Low Operating Current
—- Write Current: 1mA (Maximum)
—- Read Current: 0.5mA (Maximum)
—- Standby Current: 1μA (Maximum)
- Operating Temperature Range: -40°C to +105°C
- Green Packaging Options
—- TSSOP-8, SOP-8, DIP-8, SOT23-5